Ever look at a room and wonder what you can do to make it more fun? Paint? Wallpaper? Get all new furniture? Knock down a wall? Whoa, slow down.
All that sounds great… however you have a small budget (very small), you want to recycle, you’re renting, and oh yeah, you’re scared to death to do it yourself. You’ve come to the right place. This idea is not only great for sprucing up a room; it’s new and unique party fun.
Let everyone decorate one and it becomes a party favor. This works for kids and adults!
Personalized plates make great gifts – especially from children to their friends and family. Think early drawings, handprints or even just abstract squiggles.
What you’ll need:
- Blank (plastic) switch plate. Of course you can buy a new one (they’re very inexpensive) but the idea here is to recycle, right?
- Sharp utility scissor http://www.drugstore.com/fiskars/qxb29286
- Craft knife
- Double sided tape http://www.drugstore.com/scotch/qxb21916
- A variety of papers, fabrics, glitter, pictures, trimming, stickers – etc. As you’ll see, you can use just about anything to cover, decorate or paint a switch plate.
Like following a recipe, there are specific ingredients, or steps, to turn an average switch plate into something really unique to display in your home or to give as a personalized gift. Here are step-by-step instructions to cover a switch plate. For this example I chose my favorite wrapping paper, however you can use almost anything – a list of ideas and photos will follow.
- Turn the plate upside down and place on the wrong side of your paper then cut your pattern
- Allow at least ¾ to 1 inch all the way around the plate.
- Use double sided tape to line the inside edges of the back of the plate then wrap the paper around the sides.
- Finish folding over as if you’re wrapping a present
Turn the plate over – but wait, something’s missing.
Draw an elongated “X” as shown in step 6. Use your craft knife and cut along those lines. (Make sure you have something underneath the plate to help you avoid cutting through to the surface underneath. Place small pieces of double sided tape around the opening. Bend the triangles back until they stick to the tape.
Feel for the holes where the screws should go. Retrieve the screws and just pop them through. If you want to hide them you can paint them to blend in or in my case, I thought accent colors could be fun and painted them red. Then screw the decorated plate back on the wall
For another creative outlet – the outlet.
JUST A FEW IDEAS:
The plate is wrapped with the wallpaper that matches the wall
Photographs, illustrations, greeting cards (seasonal and misc…)
Hand-painted Spray painted
or just plain goofy
Get your kids’ involved – my neighbor’s daughter Rachel C. (11) created these:
Original artwork Duct tape
Trims, beads, sequins and glitter and spray sparkles on a metal outlet plate!
Stickers, stickers, stickers….Tips:
- If you’re putting the plate in the kitchen, bathroom or child’s room you’re going to want to use washable paper. Or you can always coat the paper with a gloss, flat or shellac type protection. Check the warnings, especially for the kids’ rooms.
- Nail polishes (both clear and color) are great for this kind of project. It’s very shiny and usually dries quickly
- Glue can be used instead of double side tape; however glue takes longer to dry and may not be effective with heavier papers or fabric.
- Check copyrights on all photos, artwork and team logos.
There’s no end to the possibilities. You can make your design permanent or temporary. You can even use the same switch plate over and over again. Have fun and be creative!